| 【文章摘要】 Titanium alloys, with the high specific strength and low elastic modulus, are currently the research focus of many applications. Various surface treatments have been applied with the intention of improving their wear and corrosion resistance. Micro-arc oxidation (MAO) technology originated from anodic oxidation (AO) technology, which has the advantages of simple process, high efficiency and environmentally friendly electrolyte. However, due to the micro-arc discharge effect, MAO coatings inevitably show the characteristic of high porosity. In this study, post-treatment of MAO coatings using AO was proposed to obtain a composite coating with both high hardness and low roughness and porosity thereby compensating for the defects of MAO coatings. After preparation, each sample was analyzed and characterized. The results indicated that AO was main conducted in the discharge channel of MAO coating and an amorphous phase coating with the matrix oxide as main component was grown in situ. The composite coating showed a slight increase in thickness and significant reduction in roughness than MAO coating and with superior wear and corrosion resistance. In conclusion, this study provides new idea and data support for improving the performance of MAO coatings, which is expected to be widely used in the field of surface treatment. |